|
Control
-
Open loop
vector control
-
Speed or
torque control
-
4 digital
inputs
- World (enable, run forward, run reverse, local/remote)
- USA (not
stop, run, jog, local/remote)
-
Switching
frequency: 3 (default)/6/12/18 kHz
-
Output
frequency 0 to 1500Hz
-
Acceleration and
Deceleration ramps (linear and S type)
-
Positive
logic control
-
Serial
communication - Modbus RTU RS485 via RJ45 connector- 4.8/9.6/19.2/38.4 kilobaud
-
DC
injection braking as standard
-
Dynamic
braking transistor as standard
-
Dynamic
motor flux V/Hz for energy saving
-
Quadratic
motor flux V/Hz for fan and pump optimization
Options
-
Full range of connectivity options with SM
Modules
-
Speed
reference input: 0-10V, 0-20mA, 4-20mA, (-10 to +10V SM-I/O Lite option)
-
Real-time clock (SM-I/O Timer option)
-
PLC functionality (LOGICSTICK option)
-
Parameter storage (SMARTSTICK option)
Protection
Under-voltage,
Supply and DC Link over-voltage, Phase loss, Drive overload, Instantaneous
over-current, Short circuit, Ground fault, Drive thermal, Watchdog, Motor
thermal |
General Characteristics
-
Maximum
overload 150% of rated current for 60s
-
Intelligent Thermal Management optimizes switching frequency
-
8 preset
speeds
-
Flying
start
-
Mains dip
ride through
-
Automatic
no-spin auto-tune for fast performance optimization
-
Keypad
access to all parameters for more demanding set-ups
Environment
-
P20
-
NEMA 1
rating with optional cover
-
Ambient
temperature -10 to +40°C @ 3kHz switching
-
Humidity
95% maximum (non-condensing)
-
Electromagnetic Immunity complies with EN61800-3 and EN61000-6-3 and 4
-
Electromagnetic Emissions complies with EN61800-3 (second environment)
as standard.
-
Complies with EN61000-6-3 (residential) & EN61000-6-4
(industrial) generic standards with optional footprint EMC filter
|
